3D Printing
-
No original carts were harmed: a GX4000 cartridge from a community PCB, a 74112 in place of the ACID chip, a freshly burned EPROM and a label made from scratch.
-
A new 3D printing station, a huge Creality CR-6 Max, and a belt tensioner snapped in transit. Creality had replacements here in about six working days.
-
A dead Tatung Einstein, a vented capacitor and a blown fuse. I swap in a Mean Well PT-65B on a custom 3D printed mount inside the original PSU shell.
-
Mike Dailly’s US 3DO arrived with its cable cut off. I test it, swap in a Triad transformer wired for 230V, service the CD drive and print the missing flap.
-
A dusty Saturn from Mike Dailly gives a black screen. I track down the fault, then fit a Fenrir ODE, update its firmware and test European, US and Japanese games from SD card.